SYNLUBE PLUS

MONO-MOLECULAR BONDING AGENT

 

DESCRIPTION

SYNLUBE PLUS is a blend of oil soluble lubricants with synergistic metal coating properties.  SYNLUBE PLUS coats the entire drilling assembly and casing with a tenacious lubricating film which chemically bonds to the metal surfaces. This lubricant film acts to prevent adhesion of sticky formation solids to the metal surfaces. SYNLUBE PLUS protects metal surfaces from friction wear by remaining between the surface of the metal and the source of friction. As the lubricant becomes worn off from extreme pressure friction, a new coating is laid down immediately as long as there is a sufficient SYNLUBE PLUS in the drilling fluid.  The chemical attraction of SYNLUBE PLUS components to metal is very strong and is enhanced in high temperature environments.

 

SPECIFICATIONS

Appearance:  Amber Liquid

Specific Gravity:  0.84

Solubility in H2O:  Insoluble

Flash Point, PMCC, F:  265°F

 

RECOMMENDED TREATMENT

SYNLUBE PLUS does not mix with water based drilling fluids, and any attempt to emulsify it may diminish its effectiveness. It acts alone as a separate phase of the drilling fluid to accomplish its results. Add at 2 – 3% by volume.

 

PACKAGING, HANDLING AND STORAGE

SYNLUBE PLUS comes packaged in 55 gallon drums or in 550 gallon totes.

Avoid skin and eye contact. If contact occurs, flush with water for several minutes.

 

PRIVATE LABELING AVAILABLE

Contact INTEGRITY INDUSTRIES, INC., for more information about private labeling.

 

BACK TO LUBRICANTS PRODUCTS PAGE

INTEGRITY INDUSTRIES, INC.  •  P.O. Box 5342  •  Kingsville  •  Texas  •  78363  •  phone (361) 595-5561  •  fax (361) 595-5588