ULTRA LUBE II (E)

HORIZONTAL DRILLING LUBRICANT

 

DESCRIPTION

ULTRA LUBE II (E) is a High-Tech lubricant concentrate specifically developed for highly deviated or horizontal drilling applications for both land and offshore use. ULTRA LUBE II (E) has a high affinity for metal surfaces, and will adhere tenaciously to drill pipe and drill collars. This guarantees that the lubricant will be concentrated exactly where it is needed, between the pipe and the formation. The pipe can then slide effectively without excessive loss of weight to the bit. ULTRA LUBE II (E) eliminates torque and drag, prevents differential sticking, and protects the drill pipe from corrosion. ULTRA LUBE II (E) is environmentally safe, non-flammable, does not produce a sheen, and has a LC50 of >580,000 at a 100% concentration.

 

SPECIFICATIONS

Appearance:  Clear brown liquid

Specific Gravity:  0.84

Freezing Point:  <-10°C

Boiling Point:  >270°C

Solubility in H2O:  Dispersible

Vapor Pressure: <0.05

 

RECOMMENDED TREATMENT

The extreme efficiency of this product allows for low use levels. For a typical 800-1000 bbl system, add 1-1/2 drums slowly (one drum per hour). Maintain the system as needed while drilling. Always add the product s-l-o-w-l-y into the suction pit as close to the suction line as possible. ULTRA LUBE II (E) is an oil soluble product and will not mix readily with the drilling fluid.

 

PACKAGING, HANDLING AND STORAGE

Packaged in 550 gallon totes, 55 gallon drums, or 5 gallon plastic pails.

Store between 40°F - 120°F.

Handle with caution. Avoid contact with skin and eyes. If skin contact occurs, wash with soap and water. If eye contact occurs, flush with water for 15 minutes, contact physician.

 

PRIVATE LABELING AVAILABLE

Contact INTEGRITY INDUSTRIES, INC., for more information about private labeling.

 

BACK TO LUBRICANTS PRODUCTS PAGE

INTEGRITY INDUSTRIES, INC.  •  P.O. Box 5342  •  Kingsville  •  Texas  •  78363  •  phone (361) 595-5561  •  fax (361) 595-5588