WM-310

OIL-IN-WATER EMULSIFIER

 

DESCRIPTION

WM-310 OIL-IN-WATER EMULSIFIER is a concentrate designed to emulsify No. 2 diesel or crude oil in fresh water, sea water or saturated salt/mud systems. This unique emulsifier lowers interfacial tensions and preferentially oil-wets rubbing metal surfaces to reduce friction and torque. Thus it minimizes balling and wall sticking and increases drilling rates.  The oil/water/mud emulsion helps plug permeable openings in the wall cake to aid control of fluid loss. WM-310 withstands extreme pressures and temperatures up to 400°F.

 

SPECIFICATIONS

Pour Point:  64°F

pH, 5% aqueous dispersion:  7.9 – 9.0

Specific Gravity:  1.06

Flash Point:  85°F

Density: 8.8 lbs/gal

Viscosity, Brookfield @ 77°F: 450cp

Solubility, 10% in:  Water – soluble

                              Xylene – insoluble

                              Isopropanol – soluble

                              Kerosene – insoluble

 

RECOMMENDED TREATMENT

Blend WM-310 into the water phase at 1#/bbl for every 3% oil concentration and circulate in pits. Slowly add oil phase to system under high agitation and sheer.

 

PACKAGING, HANDLING AND STORAGE

WM-310 is available in 5 gallon pails, 55 gallon drums, and totes.

 

PRIVATE LABELING AVAILABLE

Contact INTEGRITY INDUSTRIES, INC., for more information about private labeling.

 

BACK TO SPECIALTY CHEMICALS PRODUCTS PAGE

INTEGRITY INDUSTRIES, INC.  •  P.O. Box 5342  •  Kingsville  •  Texas  •  78363  •  phone (361) 595-5561  •  fax (361) 595-5588