X-VIS

 

DESCRIPTION

Integrity’s X-VIS polymer is a high molecular weight xanthan biopolymer used for rheology in water based circulating systems. Its primary function is to provide effective viscosity for solids transport and solids suspension. It will enable optimum rheology control through superior low shear rate viscosity which is highly shear thinning. X-VIS will perform effectively in all types of water based circulating fluids from low solids to highly weighted systems. This includes fresh water, salt and heavy brine systems.

 

SPECIFICATIONS

Appearance:  Off white fine powder

pH Level:  6.1 – 8.1

Loss on Drying:  11.0% max

Particle Size:  100% thru 100 mesh

Viscosity:  1200 cps min.; 1400 cps typ.

 

RECOMMENDED USE

X-VIS should be added slowly through the hopper at maximum sheer to avoid lumping and to minimize waste. When used as the primary viscosifier in a low colloid system 1.0 to 2.0 lb/bbl may be required. Higher concentrations up to 4 lb/bbl may be used for extremely high transport requirements.

 

PACKAGING, HANDLING AND STORAGE

X-VIS comes packaged in 50 lb. or 25 Kg plastic lined paper bags. X-VIS is Non-Hazardous.  If contact with eyes: flush with plenty of water.

 

PRIVATE LABELING AVAILABLE

Contact INTEGRITY INDUSTRIES, INC., for more information about private labeling.

 

BACK TO SUSPENSION TECHNOLOGY PRODUCTS PAGE

INTEGRITY INDUSTRIES, INC.  •  P.O. Box 5342  •  Kingsville  •  Texas  •  78363  •  phone (361) 595-5561  •  fax (361) 595-5588